Call us : Phone 01977 554775

Visa Card Mastercard Maestro Card Visa Electron PayPal

Vokera 3207 Flowmatic Diverter Valve | AK Gas Appliance & Spares Ltd

Vokera 3207 Flowmatic Diverter Valve

This Vokera Diverter Valve - Three Way Valve 3207 diverts heat to the hot tap or central heating radiators when required.

Price: £89.95



Vokera 3207 Flowmatic Diverter Valve

This Vokera Diverter Valve is also known as a 3 way valve or three way valve, it?s a mechanical boiler part that is designed to ensure the heat that?s produced by the boiler is either diverted to the hot tap (if there is a demand for hot water) or around the central heating if there is a demand for central heating.

Note a Vokera combination boiler can only supply heat to 1 source at any one time, either hot water or central heating but not both at the same time.

The most common symtom of a faulty diverter valve is the lack of hot water at the hot tap. People start to turn the flow down at the hot tap in order to get hot water but after a period of time even this doesn't work. Other people realise that if they switch the central heating on they can get better hot water flow at the tap but again this only lasts for a short period of time. A good way of testing if this Vokera diverter valve is faulty is to turn the boiler off and let the central heating and boiler cool down, then turn the boiler back on but into hot water mode only. Run the hot tap and leave it running then go to the boiler, under the boiler there are 5 pipes (2 central heating pipes, 1 cold water feed pipe, 1 hot water pipe and a gas pipe) touch the central heating pipes to see if 1 of them is getting hot, if one of them is then the diverter valve has failed because instead of diverting the heat generated by the boiler to to the hot tap its allowing the heat to go down the central heating. If you were to leave the hot tap running for a longer period of time the radiators would start to get hot.

When fitting this diverter valve it is good practice to replace the fibre washers that connect the diverter valve to the pipe work. Also some diverter valves are connected to the pipe work via O?rings, these O?rings do need to be lubricated with silicone grease for 2 reasons:

  1. To enable the pipes to slide into position easily.
  2. To prevent the Vokera hydraulics parts from leaking once changed.

We do supply a 5ml jar of silicone grease and we also supply a Diverter Valve generic washer kit please see the related products below.

Note other customers have bought some or all of the products below when purchasing this product, please check to see if you require any of the products below.

This Product Fits The Following Boilers:
Fits: Vokera 18/72 Dmcf Combi
Vokera 20/80 Rs Flowmatic
Vokera 20-80 Cf Flowmatic
Vokera 20-80 Rs Turbo
Vokera 24/96 Rse Flowmatic
Vokera 24-96 Cf Flowmatic
Guarantees & Warranties
All parts sold by AK Gas Appliance & Spares Ltd are brand new, they are not used or reconditioned in any way. When buying from us you can rest assured your product is CE Approved and comes with a 1 Year Warranty.
Further Information
This is an OEM Part

The term OEM stands for "Original Equipment Manufacturer" this part is an original part and was bought from the Original manufacturer of the part.

What does that really meanr a boiler manufacturer such as Wocester Bosch, Baxi, Glowworm etc.

Below is an example:

Gas Valves on most British Gas Boilers are made by Honeywell, Sit, White Rogers etc. This means that these manufacturers are the OEM for the Boiler Manufacturers, so as long as the original part is purchased (Honeywell, Sit, White Rogers) from the OEM it can be sold as an original OEM product.

OEM parts are also referred to as After Market Parts.

Search By Part Number



Click here to view our feedback on Trust Pilot

Click here to view our feedback on Google Reviews